MCI7 Auto Slack Adjusters

[Stormcloud]

Has anyone here installed auto slack adjusters on an MC7? I would like to install them on all wheels if I can source them, but wanting to start with drive axle.

I checked with Luke already. No luck.

Thanks in advance.

Mark

[luvrbus]

 Mark I doubt you ever find a auto slack adjuster that will work with your S/cams splines , changing the S/Cams for auto adjusters is not worth it IMO

[Stormcloud]

Thanks. I figured if Luke can't access them, then they probably are not be available.

A stab in the dark, so to speak.

[Jim Eh.]

I find auto slacks are not all they are cracked up to be. They need constant lubrication to work properly and you tend to get complacent about what's going on underneath. Not the worst thing in the world to strain sliding under to have a look, lube, adjust. 

[eagle19952]

I find auto slacks are not all they are cracked up to be. They need constant lubrication to work properly and you tend to get complacent about what's going on underneath. Not the worst thing in the world to strain sliding under to have a look, lube, adjust. 

i hate um. don't trust them and would not rely on them so i would not have them ... 

[lostagain]

Auto slacks were made for hired drivers. I like manuals for my own vehicles. They only need adjusting once a year with the little mileage I do: 10 to 20000 miles.


Sent from my iPhone using Tapatalk