Water Pump for DD S-40 - Page 3
 

Water Pump for DD S-40

Started by Lostranger, July 22, 2015, 11:07:39 AM

Previous topic - Next topic
Print
Go Down Pages 1 2 3 All
User actions

eagle19952

#30
August 03, 2015, 04:59:43 PM
Quote from: Oonrahnjay on August 03, 2015, 01:57:12 PM
    Yep.  (I noticed that the list price on the ones from Amazon are north of $20 ... IME, that's about average.  Sorry, but they're GOOD clamps.)

the ones i see are avg 10-12 $$'s...

http://www.amazon.com/Trident-Marine-730-3120-Stainless-Contant/dp/B005FCI9U6/ref=sr_1_1?ie=UTF8&qid=1438647560&sr=8-1&keywords=Stainless+Steel+Contant+torque+Hose+Clamp
Donald PH
1978 Model 05 Eagle w/Torsilastic Suspension,8V71 N, DD, Allison on 24.5's 12kw Kubota.

Oonrahnjay

#31
August 03, 2015, 10:17:09 PM
Quote from: eagle19952 on August 03, 2015, 04:59:43 PM
the ones i see are avg 10-12 $$'s..

   Yeah, that looks good from Amazon.  I expect to pay a little more in "brick-and-mortar" stores.  But they're worth it.
Bruce H; Wallace (near Wilmington) NC
1976 Daimler (British) Double-Decker Bus; 34' long

(New Email -- brucebearnc@ (theGoogle gmail place) .com)

Lostranger

#32
August 05, 2015, 08:42:07 AM
I found those spring loaded clamps at NAPA for $4.60/ea. Thanks again, Bruce, for the heads up.

Jim H
Jim H.
Marion, NC
1999 Gillig H2000LF
Yes Virginia,
You CAN convert a low floor.

Oonrahnjay

#33
August 05, 2015, 10:20:24 AM
Quote from: Lostranger on August 05, 2015, 08:42:07 AMI found those spring loaded clamps at NAPA for $4.60/ea. Thanks again, Bruce, for the heads up.

Jim H

   Nice!!  That's a good price.  Tighten them as listed and then recheck in two weeks or so and you should be good until you need to take them off for any reason.
Bruce H; Wallace (near Wilmington) NC
1976 Daimler (British) Double-Decker Bus; 34' long

(New Email -- brucebearnc@ (theGoogle gmail place) .com)
Print
Go Up Pages 1 2 3 All
User actions