Raised Driver Station
 

Raised Driver Station

Started by hoots, March 12, 2014, 05:23:57 PM

Previous topic - Next topic

hoots

Hi all, I'm new here and I just started gutting my '89 Eagle. I was reading the march issue of BCM and saw the featured Eagle and the drivers seat was level with the living quarters. How the heck does one do that?

Thanks
hoots

Melbo

B&B Coachworks in Las Vegas did it on an eagle I believe

They advertise on this site

They did a repower for me

Good people.

HTH

Melbo
If it won't go FORCE it ---- if it breaks it needed to be replaced anyway
Albuquerque, NM   MC8 L10 Cummins ZF

luvrbus

It is a simple deal on a Eagle that option was available from the factory from Eagle I don't care for it much as it adds a step but it does makes for more room and a easier layout of the bus IMO, go to www.eaglesinternational.net lot of those guys there have done it

good luck
Life is short drink the good wine first

hoots

thanks guys for your replies!

Cary and Don

That is our bus.  This raise was done with the roof raise.  They basically raised the floor, windshield, side windows, and roof. That made the floor flat from front to rear. Then it got the larger 15 model windshield and rv side windows. Both front seats will turn to the rear.

Don and Cary
1973 05 Eagle
Neoplan AN340

hoots

Thanks, The front seats being able to turn to the rear is what appealed to me.

hoots