24V marker lights?

[chart1]

I removed the oem units and connected the wires on the new lights put 2 screws in and presto very bright nice looking lights. 

[bevans6]

I installed my Micro Nova LED bulb replacement today, it worked fine.  I needed to use a little adhesive on the gasket  as it was just a little too big to be a push fit.  My problem was I wanted to retain the existing assemblies and just replace the bulb socket, and that worked out fine.

Brian

[bergdoll]

Had just put in the wrong (12V) bulbs. Got the 24V @ Grainger, NOT cheap. Switching to LED's & a 12V system...