Here we go again....... Electric Question

[belfert]

No wonder the plug fits so well into a 50 amp receptacle!

[Len Silva]

Take a look at this chart:
http://www.generatorjoe.net/html/web/outlet/quailplug.html

I'm guessing you have a 6-50P on the welder.

Didn't you just install a 50 amp service for the bus?  Can you use that outlet?  If it's in a good location for you, you could install the proper plug on the welder (I'm guessing a 14-50) and just not use the neutral connection.  Or, you could make up an adapter to accomplish the same thing.

[happycamperbrat]

No wonder the plug fits so well into a 50 amp receptacle!

haha!! Never state the obvious  

Take a look at this chart:
http://www.generatorjoe.net/html/web/outlet/quailplug.html

I'm guessing you have a 6-50P on the welder.

Didn't you just install a 50 amp service for the bus?  Can you use that outlet?  If it's in a good location for you, you could install the proper plug on the welder (I'm guessing a 14-50) and just not use the neutral connection.  Or, you could make up an adapter to accomplish the same thing.

Nah! Youre no fun, that's too easy. I gotta do everything the hard way lol Actually, this does sound nice and I like it!! Thank you!!