MCI 7 rear wheel well moulding

edvanland · July 07, 2011, 02:27:31 PM

OK no one has ones for the right hand side tag opening. My question is now will any other mouldings for a MCI work? I don't care if I have to by all of them for the right hand rear openings. I would hate to have to live and be reminded of my big UPS each time I look at her.
Any help or thoughts would be appreicated.
Thanks
ED Vanland
MCI 7 with a BIG BOO BOO

babell2 · July 07, 2011, 04:04:21 PM

Just a thought but are the left and right sides mirror of each other? Left front the same as right rear? like I said just looking at my MC-9 looks close.

Brice

Chopper Scott · July 08, 2011, 05:36:26 PM

My 7 has the R&M fiberglass caps over the rears. If you look at one side they appear to be running down hill. Looking at the other side they are running uphill. I know it didn't help you with your question so sorry. At least I bumped it back into the front page!

edvanland · July 09, 2011, 10:41:15 AM

Thanks Scott
I called RM and they said they do not have them. Yes the left front half looks just like the right rear half. Still trying to find out if another model MCI will interchange.
Boy I sure hope I don't have to go on with a constant reminder of my UOPS. Would not have been so bad if it had been the left side cause then I would not have to look at it when I sit under the awning.
Thanks
ED

Chopper Scott · July 09, 2011, 11:02:15 AM

Are they the stock ones or are they the fiberglass R & M's? If they are fiberglass and you have some pieces they could be repaired. If you can post us a pic.

edvanland · July 10, 2011, 11:34:27 AM

No they are the original alumuminan.
ED

Chopper Scott · July 10, 2011, 03:59:27 PM

I guess that's just another of the pitfalls of owning something that there are few of. Surely someone knows of a bus salvage yard that may help Ed out.