mci ph. #
 

mci ph. #

Started by ruthi, February 18, 2010, 11:36:14 AM

Previous topic - Next topic

ruthi

Can anyone give me the phone number for mci to ask about a part? Thanks
Mixed up Dina, ready for the road as of 12/25/2010
Home in middle Georgia, located somewhere in the
southeast most of the time.
FIRST RALLY ATTENDED: BUSSIN 2011!

MattC

Okies,

MCI in Dallas is

800-323-1238
Toll Free Fax: 800-525-4569

Or better yet.... 

http://www.mcicoach.com/Parts-Service-Support/partsStore.htm

Good Luck

Matt
MCI 102A3 / 6V92 / HT740
Camping in our House LOL
WL7CQH

ruthi

thanks, holy moly, they want over 700 dollars for the windshield rubber for the Dina. WOW
Mixed up Dina, ready for the road as of 12/25/2010
Home in middle Georgia, located somewhere in the
southeast most of the time.
FIRST RALLY ATTENDED: BUSSIN 2011!

belfert

I don't think it was nearly that expensive a few years ago.  Call C&J Bus Repair 952-881-0034 and ask them about the part.  Mention my name and they can look up what part number they used to replace my windshields a few years back.  Hopefully they can order it from MCI for you for less than $700, but maybe not.

(My windshields were paid for by insurance so I don't have an invoice with the part number.)
Brian Elfert - 1995 Dina Viaggio 1000 Series 60/B500 - 75% done but usable - Minneapolis, MN

Ed Hackenbruch

Used to own a 1968 MCI 5A and a 1977 5C.

busshawg

I bought windshield seals and the rubber piece that goes in them to keep them tight for somewhere around 200 bucks for the pair, don't think it was even that much, sent them right to me, I know it was under the amount that they provide free shipping with as I had to order some other things as well to get the free shipping. I ordered from MCI
Have Fun!!
Grant

ruthi

Can you tell me how to get hold of Luke? We talked to the folks at MCI and that was the price they quoted us. It is as much for the rubber for the windshield as it is to buy the windshields. We wanted to go ahead and replace the rubber cause we are putting in the new windshields, just to be sure there are no leaks or wind noise, but, wow, what a price to pay. Thanks for the info.
Mixed up Dina, ready for the road as of 12/25/2010
Home in middle Georgia, located somewhere in the
southeast most of the time.
FIRST RALLY ATTENDED: BUSSIN 2011!

buswarrior

US Coach:

1-888-262-2434
or
1-856-794-3104

happy coaching!
buswarrior
Frozen North, Greater Toronto Area
new project: 1995 MCI 102D3, Cat 3176b, Eaton Autoshift

ruthi

Mixed up Dina, ready for the road as of 12/25/2010
Home in middle Georgia, located somewhere in the
southeast most of the time.
FIRST RALLY ATTENDED: BUSSIN 2011!

belfert

Ruthi has a Dina Viaggio like I do.  MCI is probably going to be the only source for this unless someone else can order from MCI for less.  I recommended C&J only because they might have a different part number and be able to order it for less than $700.

The Dina windshield gasket is one thick piece and does not have a lock strip like most other buses.
Brian Elfert - 1995 Dina Viaggio 1000 Series 60/B500 - 75% done but usable - Minneapolis, MN

Chopper Scott

If anyone can get it for less it will probably be Luke. Hopefully it's not something that common vendors can't get.
Seven Heaven.... I pray a lot every time I head down the road!!
Bad decisions make good stories.

johns4104s

What about Mohawk?

John