Allison ht 740 valve body help
 

Allison ht 740 valve body help

Started by hargreaves, February 15, 2010, 04:48:20 PM

Previous topic - Next topic

hargreaves

I am looking for a blow up of the valve body on a 740, I'm looking to adjust the shifts and need to know the shift valve locations. If anyone can help it would be greatly appreciated.     Gerry
now as of Feb 2012 series 50 B400  . Sunshine Coast British Columbia

compedgemarine

did you try the Allison website? I know they have a lot of the manuals on there you can download.
steve

luvrbus

You need foldout 20B and 21A what gear are you trying to change.
Look at your 3 digit number on the governor if it does not have a M in the digits the shift points are going to be hard to set right with out changing the governor 


good luck
Life is short drink the good wine first

hargreaves

Thanks Luvrbus, I have to go under the bus to check the governor. The shift point I want to change is third to fourth. It shifts up at about 40 mph in a closed throttle situation. When I step on the throttle it atomatically shifts back to third. I would like to get it to not shift at least until 45 mph.
now as of Feb 2012 series 50 B400  . Sunshine Coast British Columbia