Bus Ramps

[bigjohnkub]

Phillip: mine bent when tire blew out.
  Big John

[luvrbus]

Looking at those man am I happy with owning a Eagle with HWH levelers I doubt if I could lift one but a button is no problem for me LOL


good luck

[white-eagle]

Clifford, Big Foot declined to touch my Eagle, but i was quoted $4000 for a set, braced and installed by a dealer.  i now have 3 2 by 12 boards nailed together.  Cost about $30.  With a little occasional exercise, i don't need ramps as big as the ones shown here, so i can still move them easily.

[gus]

After looking again I realize they are too steep for my 4104, the body would hit at either end before the wheel got to the ramps.

[bobofthenorth]

That was a big consideration on mine.  I used planed 2x10 (9.5" actual) because they would fit under the body in front of the drivers.  I place them ahead of the drivers and roll forward onto them.  They are a really tight fit for the fronts but they work there too.  9.5" was more than enough in my case because I can actually squirm under the rear with the bags deflated.  Its not that much fun but I can do it.