To seal the new 35 foot roll of fiberglass i am using from R&m to cover up all of the 8 side windows i will be using pop rivets to hold the fiberglass to the skin!and then reframing 4 new windows!what would u suggest using to seal top and bottom edges and around window openings<butyl tape/putty tape,silicone sikaflex,?
And on the top and bottom edges and all around the stock rivets is going to be 1/8 think of fiberglass resin,so the new fiberglass skin is going to lay 1/8 above the old skin and rivets witch i am leaving in place,because the interior is very well done and not even worth it to mess with stripping the inside i know this may sound like a hack job but i have really no shelter or $ to regut the bus!the inside of the bus is done up in all walnut,so what do u think? the reason i am doing this all 8 windows leak,p/o parked it 8 months of the year right next to salt water in mexico and rust in is overwhelming,i do plan on cleaning and stoping the rust?? johnjem 4905
I would use sika flex 1A, great stuff, they use it on metal buildings and roofs, I seal everything with it and it is easy to find. I get it from the lumber yard.
Ray D
i will take a look at that thanks ray
JOhn, try this.......http://www.sikaindustry.com/ind/ipd-transoem-transprod