BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Fredward on May 14, 2008, 07:36:12 PM

Title: Well here we go - Shake Down Cruise
Post by: Fredward on May 14, 2008, 07:36:12 PM
Now that the new clutch is in and the engine is re-installed; we're going up north for the weekend to see if there is any ice still on the lakes in the Iron Range of Minnesota. Its about 240 miles up there. I just re-installed the rear bumper last night and the engine runs real nice. No new leaks so far (Other than that left valve cover gasket) I put in 99 gallons of fuel last night from my bulk tank - ouch thats gonna leave a mark. Good thing my pump counts gallons not dollars. 

Thanks to Brian Diehl the engine swapping master for your help on the project. Thanks to Gumpy for staying away ever since I pulled the engine.
Fred
Title: Re: Well here we go - Shake Down Cruise
Post by: FloridaCliff on May 14, 2008, 07:41:11 PM
Fred,

Congrats on getting her all back together........

Arn't they ALL shakedown cruises?  Sort of!

Cliff
Title: Re: Well here we go - Shake Down Cruise
Post by: Melbo on May 14, 2008, 07:45:52 PM
Every one I take seems to be a shakedown of one sort or another

Good Luck

Melbo
Title: Re: Well here we go - Shake Down Cruise
Post by: Ncbob on May 15, 2008, 06:48:40 AM
A 'Well Done' to you Fred. Hope all goes well.

I found, after installing the new clutch, that I felt better in doing a clutch free play adjustment before taking a trip for about the first 4-5 trips. I find that as time goes by the clutch requires less attention. Must be 'broken in' now.

For the record I'm one of those old timers who is very easy on clutches.

Bob
Title: Re: Well here we go - Shake Down Cruise
Post by: superpickle on May 15, 2008, 10:11:41 AM
Quote from: FloridaCliff on May 14, 2008, 07:41:11 PM
Fred,

Congrats on getting her all back together........

Arn't they ALL shakedown cruises?  Sort of!

Cliff

;D  Hopfuly it Aint from the Mechanic takeing by the Heels and Shakeing all the money down out of your pockets  ;)
Title: Re: Well here we go - Shake Down Cruise
Post by: buddydawg on May 15, 2008, 11:11:05 AM
Just don't shake it to hard....   ;)
Title: Re: Well here we go - Shake Down Cruise
Post by: gumpy on May 15, 2008, 04:24:32 PM
Quote from: Fredward on May 14, 2008, 07:36:12 PM
... Thanks to Gumpy for staying away ever since I pulled the engine.
Fred

Fred who?

Heh heh.. would you believe I forgot where you live ?

Title: Re: Well here we go - Shake Down Cruise
Post by: Fredward on May 19, 2008, 07:53:20 PM
Craig,
I'm not buying that. I think you have a GPS.
The bus ran great 460 miles almost got pulled over for speeding between Eveleth and Cook. Didn't realize it had creeped up to 70 in a 55.
Fred
Title: Re: Well here we go - Shake Down Cruise
Post by: Brian Diehl on May 19, 2008, 08:00:12 PM
Welcome back Fred!  I'm glad you had a great weekend away!  Time for the cruise control to save you from actually getting pulled over!  So, you happy with the way it ran?

Did you enjoy the frost warnings?  Any snow Sunday morning?
Title: Re: Well here we go - Shake Down Cruise
Post by: Fredward on May 19, 2008, 08:25:50 PM
Yes Brian it runs real well. And the clutch is 100 percent improvement. Weatherwise, we got by fine. It was windy but mostly sunny. There was frost on the ground Sunday morning! Thanks again for your help. I've got it back in the shop now so I can go over it closely to see if I missed anything; loose bolts or whatever.

I can see how one could get the bug to change the power plant. The mechanical work is fun.
Title: Re: Well here we go - Shake Down Cruise
Post by: gumpy on May 20, 2008, 07:42:00 PM
Quote from: Fredward on May 19, 2008, 07:53:20 PM
Craig,
I'm not buying that. I think you have a GPS.
The bus ran great 460 miles almost got pulled over for speeding between Eveleth and Cook. Didn't realize it had creeped up to 70 in a 55.
Fred

Hee Hee... What'd that cost you?

I found out the other day a friend of mine in Buffalo is building a Kingsley home brew. Bought a 2002 Volvo and had it stretched to 42 ft. Built a box and sided it and is working on the interior. I haven't seen it yet, but it sounds like he's going full bore on it and doing a decent job. Let me know if you want to go see it some day.


Title: Re: Well here we go - Shake Down Cruise
Post by: Brian Diehl on May 20, 2008, 07:43:33 PM
Craig, I'll go with ... be curious to see how it is being done and what amenities he is including ....  Let me know
Title: Re: Well here we go - Shake Down Cruise
Post by: FloridaCliff on May 20, 2008, 07:49:51 PM
Quote from: gumpy on May 20, 2008, 07:42:00 PM
I found out the other day a friend of mine in Buffalo is building a Kingsley home brew. Bought a 2002 Volvo and had it stretched to 42 ft. Built a box and sided it and is working on the interior. I haven't seen it yet, but it sounds like he's going full bore on it and doing a decent job. Let me know if you want to go see it some day.

Craig,

If you take some pictures while your visiting I would love to see them, on or off board.

This is a future project that I have some interest in.

Thanks

Cliff
Title: Re: Well here we go - Shake Down Cruise
Post by: Fredward on May 21, 2008, 10:23:10 AM
Craig/Brian:
Sounds like a field trip worthy of participation. Some evening perhaps?
Fred
Title: Re: Well here we go - Shake Down Cruise
Post by: gumpy on May 21, 2008, 08:15:19 PM
Yeah, I'll check with him. Maybe next week some evening. It's getting pretty tight on the schedule with graduation and all coming up. I'll let you guys know.

Any day better for either?  Maybe around 7:30 ish??



Title: Re: Well here we go - Shake Down Cruise
Post by: Brian Diehl on May 22, 2008, 04:29:53 AM
probably any day except Thursday would work for me ...
Title: Re: Well here we go - Shake Down Cruise
Post by: Fredward on May 22, 2008, 10:49:45 AM
I'm open. email or call me.
Fred