Print Page - 24V TO 12 V help

Title: 24V TO 12 V help
Post by: Austin on May 10, 2008, 05:20:07 PM

I am pulling a trailer with my MCI i need to drop 24 volts down to 12 volts how can I do this without changing all the bulbs??

Title: Re: 24V TO 12 V help
Post by: Nick Badame Refrig/ACC on May 10, 2008, 06:12:01 PM

Hi Austin,

Craig Shephard [Gumpy] a member here built my converter and it is a very simple install.

http://www.gumpydog.com/bus/MC9_WIP/Electrical/Tail_Light_Converter/tail_light_converter.htm

Good Luck
Nick-

Title: Re: 24V TO 12 V help
Post by: Melbo on May 10, 2008, 08:05:23 PM

for the simple quick low cost fix you can simply put two twelve volt bulbs in line ( not parallel ) the trailer light and an extra bulb and they will work just fine.

melbo

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Austin on May 10, 2008, 05:20:07 PM