Print Page - Need MCI 9 or 5C info

Title: Need MCI 9 or 5C info
Post by: Tom Y on March 23, 2008, 05:02:41 PM

I can't find the inside part for around the driver window. Its no wonder its been apart for to many years. If someone can tell me is this a fiberglass frame on the inside also? I have the outer frame for the window but can't remember what was on the inside. Thanks In advance. Tom Y

Title: Re: Need MCI 9 or 5C info
Post by: christopher on March 23, 2008, 05:45:17 PM

there is a scrap metal yard in lockport ny with about 8 mci 5-c. if your close enough go see, buy what you need.
CHRISTOPHER MCI5C

Title: Re: Need MCI 9 or 5C info
Post by: Tom Y on March 23, 2008, 06:04:10 PM

Thanks, I called them and they have no intrest in selling parts. I looked some more at this and found 3 sides. I need to know what they used on the rear vertical on the drivers window. Metal or fiberglass? Thanks Tom

Title: Re: Need MCI 9 or 5C info
Post by: jjrbus on March 23, 2008, 06:24:18 PM

I redid the window area a long time ago on my 5C. To the best of my memory (which is terrible) it was fiberglass on the front, top and rear. I do not remember anything on the bottom.
HTH Jim

Title: Re: Need MCI 9 or 5C info
Post by: jhaggerty on March 24, 2008, 08:51:09 AM

Tom,

I just checked my MC9, and the same material is used at the back of the window as is at the front and top. I would say it is fibre glass of some sort.

Jim

Title: Re: Need MCI 9 or 5C info
Post by: Tom Y on March 24, 2008, 09:07:29 AM

Thanks Guys. I found the part. Mine is alumium with a couple bends in it, setting out with rear of driver window written on it. Thanks Again. Tom Y

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Tom Y on March 23, 2008, 05:02:41 PM