LIFTING TOOL
http://www.kentool.com/media_center/pr_ironmanliftbar.html
DEMOUNTING & REMOUNTING TOOL
http://www.kentool.com/catalogs/serpent_pg1_2.pdf
Also look at Bead Holding Devise # 31710 and # 31810 Wheel Protector for aluminum rim as well painted ones.
You may think you can make one of Flexor steel bar to lift wheel but you can't beat drop-forge steel for toughness from yielding out of shape.
I do not know yet how much $$ but it will pay for it self from back injury.
I think this is one of much needed tool such as IR temperature gun to keep in bus at all time.
FWIW
Sojourn for Christ, Jerry
Looks like a pretty good idea.
"Give me a lever long enough and a place to stand and I can move the earth." ~ Archimedes
LOL
Northern Tool has them:
http://www.northerntool.com/webapp/wcs/stores/servlet/NTESearch?storeId=6970&N=0&Ntk=P_Brand&Ntt=Ken-Tool&Nty=1&D=Ken-Tool&Ntx=mode+matchall&Dx=mode+matchall&cmnosearch=true
Frank
Yike, Yike, Yike, Yike, Yike!
That more then my $2.50 price to pay! LOL!
It doesn't list this tool yet but soon??
This tool http://www.kentool.com/media_center/pr_ironmanliftbar.html
We can make with Flexor steel rod about 60" long x whatever dia. hole of rim minus 1/8" smaller and deburr both ends.
All Flexor stock has dull red paint marking.
About Bead Holder...if you have a plasma cutter, you can make them too. Make 2 pieces out of ½" x 2" x 2" mild steel bar stock. The Lord willing I will have the drawing for the cut-out to post soon as it ready.
It cost must less but should do the trick.
FWIW
Sojourn for Christ, Jerry