Print Page - Help..Info from MC9 Maint. Manual

Title: Help..Info from MC9 Maint. Manual
Post by: Hi yo silver on February 15, 2008, 10:08:38 AM

I need someone with an MC9 manual to verify a measurement regarding a rear leveling valve for me. I have a manual for an 8, but don't have one for a 9 yet. I need to advise the mechanic in Ohio what the measurement from the base of the rubber bumper to the I-beam is, and I can't be sure it's the same as my manual says. I'm in Virginia, so I'm relaating the info to him by phone. Thanks,
Dennis

Title: Re: Help..Info from MC9 Maint. Manual
Post by: Marcus on February 15, 2008, 11:51:14 AM

My manual says 3-9/16" to the rubber which is supposed to be 2" thick or 5-9/16 from the base where the rubber bump is fastened. Hope this helps. marc

Title: Re: Help..Info from MC9 Maint. Manual
Post by: Hi yo silver on February 15, 2008, 01:28:13 PM

Thanks Marc,
Yep, that's precisely what I needed to verify. The measurement is the same as it states in the older manual.
Thanks again.
Dennis

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Hi yo silver on February 15, 2008, 10:08:38 AM