I just logged on and see that there are 9 users and 5 guests , what is everyone doing ?
just sitting there looking for the next post?
Maybe this site needs a chatt area?
Ok how do I update while just sitting here starring at the posts?
Hello fellow Jersey Brother ED,
Yes I also think we need a chat room.
Try clicking on users online and you will see what everybody is navigating through!
By the way, Your New England Paint job looks good!!
Nick-
Maybe some are just continously logged on. We have buses, we can't just spend the day on the BB typing or reading about it!
At least it was easier to get away with on the other board. ;D
Quote from: Ednj on April 05, 2006, 05:45:39 PM
I just logged on and see that there are 9 users and 5 guests , what is everyone doing ?
just sitting there looking for the next post?
Maybe this site needs a chatt area?
Hey, didn't you see my earlier post suggesting the same thing? Yea we really need a chat room as it gets boring just setting watching the screen for new posts.
Richard
Quote from: NewbeeMC9 on April 05, 2006, 05:54:32 PM
Maybe some are just continously logged on. We have buses, we can't just spend the day on the BB typing or reading about it!
At least it was easier to get away with on the other board. ;D
Yes I just came in from busting my _$$ on my bus all evening to see everyone here starring at a screen.
Quote from: Nick Badame Refrig. Co. on April 05, 2006, 05:51:40 PM
Hello fellow Jersey Brother ED,
Yes I also think we need a chat room.
Try clicking on users online and you will see what everybody is navigating through!
By the way, Your New England Paint job looks good!!
Nick-
Thanks Nick
I'm taking it back in June for some touch ups (cant wait) that will be my next trip.
I have a couple air brush artists that want to have some fun on it , I'll have to think about that.
Ed,
My 102 is going to starJet in Ohio. 2nd week of June!! Doing the Full body 5 color deal.
Nick-
How do you view the profiles photos in a larger size? All I see is the small one in the post and even when I view the poster profile I can only see the small one. ???
Thanks,
Don't think you can.
tomhamrick
That is why I started a post for members bus pics.
POST YOUR BUS PICS HERE
Nick-
Quote from: tomhamrick on April 06, 2006, 05:15:24 AM
How do you view the profiles photos in a larger size? All I see is the small one in the post and even when I view the poster profile I can only see the small one. ???
Thanks,
Tom, Those are 'Avatars' and I don't think they are anybigger, the software resizes them when you upload.
But, Then, here's mine in all his glory!
Quote from: Ednj on April 05, 2006, 05:45:39 PM
I just logged on and see that there are 9 users and 5 guests , what is everyone doing ?
just sitting there looking for the next post?
Maybe this site needs a chatt area?
I'm working up in Madison Wisconsin - @ my hotel - before going back to the customer site. Wishing I was staying in my bus instead of this hotel. Anyone take their bus when they work for a few days in a different city?
Best Regards, Phil
Quote from: Nick Badame Refrig. Co. on April 05, 2006, 06:35:33 PM
Ed,
My 102 is going to starJet in Ohio. 2nd week of June!! Doing the Full body 5 color deal.
Nick-
Hi Nick, can you give some specifics on StarJet, like maybe a web site or phone? Down the road, I will be looking for something similar.
Best Regards, Phil
Hi Phil,
Star Jet paint: http://users.cwnet.com/~thall/starjet.htm
Dee & Dick Cahill, are the owners
Nice people Too
Nick-
Quote from: Nick Badame Refrig. Co. on April 06, 2006, 05:57:12 AM
Hi Phil,
Star Jet paint: http://users.cwnet.com/~thall/starjet.htm
Dee & Dick Cahill, are the owners
Nice people Too
Nick-
Thanks Nick - I'll check it out. :)
Wow if I could afford them I would use them.
My friend did it for the cost of the paint.
I did not have a plan and let him do it (artistic freedom).
He painted it after the most popular bus in the world, did all the prep work and it looks really good.
He wants to do more at Mexico prices. So bring them on.
He is just outside of Portland , Maine.
Doing? Getting ready to take out the bus air. How is the easiest way to get a compressor out of an MCI 102A3?
Danny
Try using a cherry picker!
darn things weigh about 300lbs
Quote from: Danny on April 06, 2006, 08:37:20 PM
Doing? Getting ready to take out the bus air. How is the easiest way to get a compressor out of an MCI 102A3?
Danny
Quote from: Nick Badame Refrig. Co. on April 06, 2006, 08:43:52 PM
Try using a cherry picker!
darn things weigh about 300lbs
They're not that heavy.
Put some block on the floor behind it and just walk it to the edge of the door and lower it to the ground.
Use a slanted 2x6 if you need to and walk it down the ramp to the ground.
Quote from: Ednj on April 06, 2006, 06:00:28 PM
...
My friend did it for the cost of the paint.
...
He painted it after the most popular bus in the world, did all the prep work and it looks really good.
He wants to do more at Mexico prices. So bring them on.
Ed,
Where is your painter friend located? I like "Mexico prices".
I am sitting here in Middle Tennessee. Just picked up a tarp today so I can start taking the windows out in order to put metal up. I have everything ordered and ready to go. ;)
Danny
Hi Danny where in middle TN? How did you make it thru the tornados the other night? I'm right above Jackson on the KY-TN line! If not to far to travel I could help ya with get'n that compressor out and other things as I work on 'em all the time my dad owns a small charter company and we also service some for others! I have a well equiped shop between Union City, TN and Fulton, KY if ya ever need some assitance or just advice don't be afraid to holler! 731-885-7460! "Knuckle" aka Bryce Gaston 8)
Quote from: Danny on April 08, 2006, 09:24:49 PM
I am sitting here in Middle Tennessee. Just picked up a tarp today so I can start taking the windows out in order to put metal up. I have everything ordered and ready to go. ;)
Danny
Hi Danny,
Can post some pictures of the window removal and skinning process? I want to do the same, and I know there is a good deal of interest in this kind of project.
Best Regards, Phil
Quote from: plyonsMC9 on April 09, 2006, 04:12:16 AM
Quote from: Danny on April 08, 2006, 09:24:49 PM
I am sitting here in Middle Tennessee. Just picked up a tarp today so I can start taking the windows out in order to put metal up. I have everything ordered and ready to go. ;)
Danny
Hi Danny,
Can post some pictures of the window removal and skinning process? I want to do the same, and I know there is a good deal of interest in this kind of project.
Best Regards, Phil
How about some pictures of the headliner install?
Tonight I'm thinking about the air horns & trailer hitch fabrication?
What are you doing?
Bicycles will come later.