Print Page - MCI 102A2

Title: MCI 102A2
Post by: Ednj on January 23, 2008, 04:48:18 PM

Does anyone know if a MCI 102A2 Coach has a drop box?
Compared to a 102A3 you can see they move the drive's to where the tags are,
So there can't be much room for a driveshaft.
There is also an 8' difference in turning radius.
???

Title: Re: MCI 102A2
Post by: tekebird on January 23, 2008, 05:09:58 PM

drives are moved rear but not to where he tag is....roughly in the middle of the A3's rear axles

Title: Re: MCI 102A2
Post by: Tom Y on January 23, 2008, 06:06:35 PM

I was told the last MCI made with a dropbox was the 96wide 2axle. But I wouldn't bet my lunch money on it. Goodluck Tom Y

Title: Re: MCI 102A2
Post by: tekebird on January 23, 2008, 06:32:04 PM

i'll look in the manual to confirm tomorrow if I remember

Title: Re: MCI 102A2
Post by: Dallas on January 23, 2008, 08:23:30 PM

Here's a picture:

Title: Re: MCI 102A2
Post by: Ednj on January 24, 2008, 11:44:31 AM

Thanks Dallas that leaves no doubt.

Title: Re: MCI 102A2
Post by: Stan on January 24, 2008, 11:48:27 AM

Ednj: Never be 100% sure with buses. Likely someone will come on and say he has a 102A2 and it doesn't have a dropbox. A lot of buses seem to be custom built for the original buyer.

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Ednj on January 23, 2008, 04:48:18 PM