BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: FloridaCliff on October 24, 2007, 04:14:39 PM

Title: GM Buffalo 4905 Muffler Replacement
Post by: FloridaCliff on October 24, 2007, 04:14:39 PM
I have had a lot of people ask me for a list of parts I used when I replaced the muffler underneath the floor with the Duals.

I decided to start this topic so it would be easier to search in the future.

Here is the total list of parts needed:

3 1/2 Mega clamp X 8 Part# 33285

3 1/2 ID-OD Connector X 2 Part# 42983

Muffler Hangers X 2 Part#  35103

3 1/2 Elbows X 4 Part# 41366

Tail Spout X 2 Part# 41096

Muffler X 2 Part# 22632

This is all the parts you should need.

It was $418.00 (verified price on 10/24/07) plus shipping.  About 81.00 to Fla.  Closer will be better.

Just an FYI, to have an original remade (no NOS around, I am told) is about 1000.00 to your door.

You can look at the parts in diagram form on http://www.walkerheavyduty.com/ (http://www.walkerheavyduty.com/)

I bought them from http://www.rockauto.com/ (http://www.rockauto.com/) who saved me 33% from NAPA.

Compare for yourself and see who has the best deal.

The original story and pictures are here: http://www.busconversions.com/bbs/index.php?topic=1218.0 (http://www.busconversions.com/bbs/index.php?topic=1218.0) 

I am also going to put this info on that topic too!

Cliff
Title: Re: GM Buffalo 4905 Muffler Replacement
Post by: FloridaCliff on October 24, 2007, 04:22:27 PM
If anyone plans on doing this, send me an email with your phone number.

I would be happy to give a play by play on how to do it.

Cliff