Hey guys,
I am - with Jerry L's help of course!!! ;D - wiring my bus start batteries into my Zantrex 4024 inverter. I need to get the relay switch to do this, (NAPA maybe?) but I also need the book of wiring diagrams to figure out which wires I need to use to make this relay work. I found the 150 amp relay to which I am going to tie it into, but not sure which wires to use to power it. Make sense?? (I'm not overly versed in this stuff.) :-\
So........... does anybody have a book of wiring diagrams that I can buy or whatever, or can I get one copied? It sounds like it would be a good thing to have, along with my maintenance manual, but right now I just need to figure out the wires for my relay.
Thanx a bunch,
Chaz
Chaz,
Better is better when it comes to high amp DC relays, so might I suggest you look this page over before making a purchase. http://texasindustrialelectric.com/relays.asp (http://texasindustrialelectric.com/relays.asp)
Find the best one for your application, then look for it on the e place...you'll find it far cheaper than from this site. I found a 586-902 for $12.00 on the e place.
Good luck.
Jay
87 SaftLiner
I have a wiring diagram for sale
Chaz,
I have a 4108 wiring diagram, and you can have it for free.
I just sent you an email explaining.
Chris
Thanx guys. I appreciate it!!
Chaz