ok heres another ?? for u all the main line coming form the air compresser about 1 and a half inches round with 2 bolts holding it to a elbow and then to the compresser the air lin sets kinda inside the elbow with a little lip<1 of my motors used a copper ring to seal and 1 other motor used a gasket?the copper ring didnt work well was it not the right it fit good?what do u guys use to seal that line?
Johnjem,
It would be a little easier to decipher what you are asking if you didn't use the shorthand.
I'm kinda slow and I need time to think about an answer, so if you type slow, it's easier for me to figure out.
TIA
Dallas
Don't believe him John. I don't care how slow you type he will still take forever to figure it out :)
Frank
Find the right size sealing washer - proper thickness and diameter, or convert both ends to AN style fittings.
Never saw a paper gasket for that application - too hot.
Get used to it Dallas, as we oldies die off the pablum munchers are taking over, scarry thought huh??>>>Dan
The part you need is called a Gasket 11/16"dia copper asbestos GM part number is 105455
I bet Luke at US Coach can help you out with the correct part.
jlv ::)
Thank u roadrunnertex thats all i need to know thank u very much