BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: tekebird on September 10, 2007, 06:40:47 AM

Title: 4104
Post by: tekebird on September 10, 2007, 06:40:47 AM
anyone know of a 4104 parts bus

I am in need of a piece of aluminum trim.

Finders fee!!!!
Title: Re: 4104
Post by: Tom Y on September 10, 2007, 09:10:31 AM
Teke, There was one near Williamsport Pa last fall. I had a post about MCI 9 parts that they were parting out also. Not sure if either is still there. You should be able to look up the post for a phone number.  Tom Y
Title: Re: 4104
Post by: tekebird on September 10, 2007, 11:46:54 AM
tom was that at Joe and jans in Danville?
Title: Re: 4104
Post by: Tom Y on September 10, 2007, 01:31:11 PM
Teke, Yes thats the place. Right on RT 80.  The 4104 was parked off to the right in the brush. They were going to take it to the amish to scrap.  Tom Y
Title: Re: 4104
Post by: tekebird on September 10, 2007, 02:00:49 PM
headed up on Thursday.

thx
Title: Re: 4104
Post by: zubzub on September 10, 2007, 03:52:06 PM
tekebird, any interest in pulling 2 (maybe 3)items for me?.  I would of course reimburse you in some way for the trouble>  patrick 514 279 1819 or acmontreal@yahoo.com
Title: Re: 4104
Post by: tekebird on September 10, 2007, 03:53:08 PM
what you looking for?
Title: Re: 4104
Post by: zubzub on September 10, 2007, 06:56:40 PM

"I" beam brace that attaches to the big v shaped chunk of metal just forward of the rear bumper.  If they are not symetrical, I need the "L" side one (by L I mean L from the driver's seat facing forward).  L side hinge that holds the L side bumper/storage compartment below steering box Or whole bumper section if the hinge does not come off the bumper easily).  If possible ie., you have the bus up/access underneath, the aux tank if in good shape.  And finally R side mirror base, I actually only need the ball stud cap (#2, figure 14, pg 40, maintenance manual).  Really all of these items I could make/repair/ replace, but if the bus is going to that great big scrapyard in the sky....
Title: Re: 4104
Post by: tekebird on September 10, 2007, 07:26:31 PM
question is what are you willing to pay for this stuff?  Not at my place so I can't pull them so would be subject to normal shop rates.

email me direct at tekebird@yahoo.com

or call Joe and Jans in Danville PA and ask for charlie.

really no need to get me in the loop
Title: Re: 4104
Post by: 4104GA on September 10, 2007, 08:37:32 PM
Hi Doug     I have a parts bus and have some bay doors skins that I removed from my bus to replace with new skins.  What do you need?
Sam
4104GA
Title: Re: 4104
Post by: tekebird on September 10, 2007, 09:05:58 PM
need a good section of the trim below the windows but above the painted belt line
Title: Re: 4104
Post by: Tom Y on September 11, 2007, 09:32:42 AM
Teke, When I was there they had some new glass lens for lights in a bay. I should have bought, as I'm sure someone could use them. And the shop boss gave me some good deals. Or so I thought. So you may want to look around. They must still have it?  Good Luck Tom Y
Title: Re: 4104
Post by: tekebird on September 13, 2007, 01:16:02 PM
anyone interested in any 04 stuff better call Joe and jan's oin Danville PA before the thing goes to scrap (SOON)

things of interest there.

Front center marker lights rear corner marker lights.

Thermostat housing ( specific to GM Coaches with the 6-71

Fan shroud Complete uncut

Fan

turn signa;s

they will probabbly let you have the stuff for labor plus a bit.

Title: Re: 4104
Post by: tekebird on September 13, 2007, 03:40:14 PM
Zub ZUb.

call up there ask for Charlie

570-275-5318

the thing is going to the smelter in the next two weeks or so.