Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: compedgemarine on September 06, 2007, 07:08:00 PM

Title: HT740 dipstick tube
Post by: compedgemarine on September 06, 2007, 07:08:00 PM
hopefully someone has or can direct me to a dipstick tube for an Allison HT740 for my Model 10 Eagle. a PO cut the tube and put in a section of rubber hose so now I am not sure if the tube length is the same and giving me the correct level on the stick. does anyone know if the tube is specific to an Eagle or of some one who would have one? I havent had any luck on a new one as this is a little older than most Allison dealers want to mess with
thanks
steve
Title: Re: HT740 dipstick tube
Post by: TomCat on September 06, 2007, 07:19:40 PM
Steve,

Give these folks a call... http://www.defeomfg.com/htc.php (http://www.defeomfg.com/htc.php) Might be able to help you.

Jay
87 SaftLiner
Title: Re: HT740 dipstick tube
Post by: compedgemarine on September 06, 2007, 07:25:38 PM
thanks, I will give them a call tomorrow. with all the talk about under and/or over filling the trans it makes me a little nervous not knowing if the stick is right.
steve
Title: Re: HT740 dipstick tube
Post by: Tom Y on September 06, 2007, 07:53:54 PM
Steve, I would try USA parts for an Allison tube. 800-USA-7899 Ihave a pic in a book showing to oil level if this will help, for different pans also.  Tom Y
Title: Re: HT740 dipstick tube
Post by: luvrbus on September 06, 2007, 08:08:51 PM
If you check your fluid in the side door thats and Eagle dip stick and Norris at Jefferson in OK City has those
Title: Re: HT740 dipstick tube
Post by: tomhamrick on September 07, 2007, 07:04:34 AM
Got mine from Goodson Bus Sales in Maiden, NC.

Tom Hamrick
1984 Eagle 10S
Title: Re: HT740 dipstick tube
Post by: busguy01 on September 07, 2007, 07:15:32 AM
The manual for the transmission gives very direct info on how to mark the dip stick. Even if you buy all new parts it MAY not be correct. There are a bunch of different pans used on the 740 and yours may have been changed over the years. Spend you money on a manual instead of a new tube!
JimH
Title: Re: HT740 dipstick tube
Post by: luvrbus on September 07, 2007, 07:35:27 AM
Steve,i don't know how to send the drawings on this computer but busguy is right about the setting of the gauge it is not that hard to do but maybe someone could send you that page 3.1and3.2 if not i will mail it to you but these guys try to help.heres a listing for one of the best resource for Allision Transmission and Stone Bennett  info and parts

www.unitedtransmissionexchange.com
Title: Re: HT740 dipstick tube
Post by: compedgemarine on September 07, 2007, 02:45:36 PM
Hey busguy, I will probably get a manual for anyway as I like to know how everything works but I still want to change the tube as the section of rubber hose bothers me and right now the tube is not mounted anywhere and just flops around. the PO did a lot of little things like this and I am slowly trying to fix them so that if/when this thing hits the road I wont have too much come back to bite me.
thanks everyone. made some calls today and am waiting for return calls to see if someone has what I need
thanks
steve
Text only | Text with Images