Print Page - MIRROR SCHEMATICS

Title: MIRROR SCHEMATICS
Post by: sivrtnge2 on July 07, 2007, 03:23:48 PM

Do anyone have the wiring schematics for ramco and velvac mirrors??? I am changing from the small mirrors to the larger ones. They have plugs on the ramco mirrors so I was going to use the plug and wire the velvac mirrors to the plug!!! Please help a.s.a.p.
--
BILL

Title: Re: MIRROR SCHEMATICS
Post by: bs4104 on July 07, 2007, 04:04:08 PM

check your email

Title: Re: MIRROR SCHEMATICS
Post by: sivrtnge2 on July 07, 2007, 05:36:33 PM

Thanks a WATT!!! Now how about velvac???
--
BILL

Title: Re: MIRROR SCHEMATICS
Post by: bs4104 on July 07, 2007, 08:34:40 PM

Try looking up your mirrors at Velvac web page:
http://www.velvac.com/tech.htm
bruce

Title: Re: MIRROR SCHEMATICS
Post by: sivrtnge2 on July 07, 2007, 09:38:47 PM

I've tried this already. There is nothing there that is remotely similar to what I have. The old mirrors that i took off have 2 red that look like they go to the heat element, a blue and black wire that is wired together, 1 yellow and 1 white.

the new mirrors have 2 orange wires that look like they go to the heat element, 1 black, 1 white, 1 yellow.

I just don't know how these should be wired together!!!
--
BILL

Title: Re: MIRROR SCHEMATICS
Post by: sivrtnge2 on July 08, 2007, 10:56:27 AM

Thanks to all for the replies!!!
A special thanks to John for the insight on the voltmeter. I have them wired in now all I have to do is wire up my turn signals!!! ;D
--
BILL

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: sivrtnge2 on July 07, 2007, 03:23:48 PM