BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: 4104bigred on July 03, 2007, 04:16:47 AM

Title: parts check aisle 6 fan hub for a 6-71
Post by: 4104bigred on July 03, 2007, 04:16:47 AM
we need a new fan hub for a 6-71 detroit in a 4104.

anybody know where to get them????

thanks

chris
Title: Re: parts check aisle 6 fan hub for a 6-71
Post by: Busted Knuckle on July 03, 2007, 05:11:11 AM
I'd try Luke.
Title: Re: parts check aisle 6 fan hub for a 6-71
Post by: 4104bigred on July 03, 2007, 05:21:43 AM
no luck with Luke
Title: Re: parts check aisle 6 fan hub for a 6-71
Post by: Busted Knuckle on July 03, 2007, 05:30:48 AM
Oh, opps! I really don't know for sure then as I don't have a lot of experience with GM's. Might try JD @ C & J Bus repair up in the MN twin cities area. I think I remember seeing they stocked & rebuilt some hard to located GM parts as well as others. I'm sorry I don't have their # handy s I'm not home. But I know you can google it. FWIW BK ;D
Title: Re: parts check aisle 6 fan hub for a 6-71
Post by: WEC4104 on July 03, 2007, 05:34:01 AM
Is this what you are looking for? 

http://cgi.ebay.com/ebaymotors/GMC-Detroit-Diesel-6-71-4103-4104-Fan-to-Crank-HUB_W0QQcmdZViewItemQQcategoryZ34201QQihZ006QQitemZ160111751499QQrdZ1QQsspagenameZWD1V

(They're not bashful about the price, but at least its a source ..

Wayne
Title: Re: parts check aisle 6 fan hub for a 6-71
Post by: Runcutter on July 03, 2007, 06:22:50 AM
Chris, a year ago I needed a new fan for my 8V71, part of the work being done before I picked up the "new" coach.  The dealer got it from Dean's Coach in/near Durham, NC.  I understand that they are still in business after the passing of Gary Dean - I'm sure someone here has the contact information.  Another potential source is Jefferson Truck and Bus in Oklahoma City. 

Arthur
Title: Re: parts check aisle 6 fan hub for a 6-71
Post by: 4104bigred on July 03, 2007, 06:30:26 AM
thank you i will call them
Title: Re: parts check aisle 6 fan hub for a 6-71
Post by: gg04 on July 03, 2007, 07:23:41 AM
When mine started to creep off we were out on the road so I just drilled and pinned it with 3 screws spaced around the hub....when we got home I pulled it chucked it in the lathe checked balance  and trueness and welded it solid re checked trueness and have ran it ever since...not a great trial but has went over 80,000 with no troubles..also went with modern fan and dampner..gg04
Title: Re: parts check aisle 6 fan hub for a 6-71
Post by: bs4104 on July 03, 2007, 04:10:02 PM
I have a used one    email me if need. bruce