BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: sivrtnge2 on June 28, 2007, 08:09:54 AM

Title: FRESH AND CITY WATER HOOKUP
Post by: sivrtnge2 on June 28, 2007, 08:09:54 AM
I know I asked a while back...I cant find the thread...so I'll ask again. Is there a code as to the location to put the fresh and city water hookups???

Please let me know also if there is a way to view all threads that I have posted in the past???

If someone here have an Eagle, please post a pic or 2 as to where your city and fresh water is mounted. Cauldwell Coach mounted mine inside the bay...this causes floor damage!!!
--
BILL
Title: Re: FRESH AND CITY WATER HOOKUP
Post by: Dallas on June 28, 2007, 09:02:23 AM
If you look up above and to the left, you'll see a number of tabs that say, "Home, Help, Search, Profile, My Messages, Calendar, etc.), Click on "Profile"
When your profile comes up, look on the left side and you'll see, "Profile Info"
Under that heading is "Show Posts"
Click on that and it will show every post you have ever made.

I hope that helps.

Dallas
Title: Re: FRESH AND CITY WATER HOOKUP
Post by: pete81eaglefanasty on June 28, 2007, 04:49:36 PM
 Bill
Here is a picture of my set up on my eagle 10. I think you will see how it is set up. It's been working for me for  the last 8 years.


           Pete & Jean
             Fantasy
Title: Re: FRESH AND CITY WATER HOOKUP
Post by: Len Silva on June 28, 2007, 07:21:24 PM
ANSI A119.2
NFPA 1192
Standard on Recreational Vehicles 1999 Edition (The only one I have)

4-6.6
Water service connections shall be on the left road side or at the rear of the vehicle within 18" of the outside wall.

The NEC has something similar about electrical supply, left side rear third on at the rear.

FWIW,

Len
Title: Re: FRESH AND CITY WATER HOOKUP
Post by: TomC on June 29, 2007, 06:36:46 AM
Pete- nice setup-all there!  Good Luck, TomC