BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: JT4SC on June 25, 2007, 02:59:44 PM

Title: Awning help for MCI 102C3 Needed...
Post by: JT4SC on June 25, 2007, 02:59:44 PM
I was just at Camping World where they told me they could not install a Dometic power awning on my bus because of the curve above the window and drainage piece.  Evidently they dont make the curved piece at the top of these awnings anymore, you have to have ~6 inches of straight side...  Anyone else have this problem???  How did you fix it??
Title: Re: Awning help for MCI 102C3 Needed...
Post by: H3Jim on June 25, 2007, 03:27:34 PM
I fixed it with $.

I have a Prevost H3-41, and it originally had seats in it.  The type that were made for Motorhomes are VIP versions, and they have another 5" above the windows.

I talked with, and sent pictures to, one of the owners of ZIP Dee awnings as I was hearing that they might have some awnings that would fit.  He confirmed that I needed to go with the lateral arm type that sit on the roof, not bolted to the side. 

Most lateral arm awnings are very expensive.  The most expensive being Girard, although they have an unbeatable guarantee, and have reps at many rallies that will repair and adjust for free (unless you've had a cup of stupid and run them into something).

Zip Dee's are a little less expensive, and have less of a guarantee - although I think the quality is still there.

There are also other manufacturers of lateral arm, but you might need to fabricate your own mounting brackets.  That's what Chip Maxwell did on his Neoplan(although he has since passed and we all miss him).

I ran my awnings front to back on both sides, and I'm not sure I want to admit in public what I paid for them.  Did my own install, which was fairly easy.

Good luck
Title: Re: Awning help for MCI 102C3 Needed...
Post by: Nick Badame Refrig/ACC on June 25, 2007, 04:32:51 PM
Hi JT,

I also installed a Lateral arm awning like Jim. and, I have a 102C3 like you.

Camping world is the wrong place to go for bus conversions, I can obtain the arms that you need for your bus. I'm also a A&E OEM supplier

with more knowledge on bus awnings then they would know. If you need to call me, feel free!  609-263-2296 office

Nick-
Title: Re: Awning help for MCI 102C3 Needed...
Post by: H3Jim on June 25, 2007, 06:43:30 PM
and the nice thing about the lateral arm awnings is that they don't have the annoying side arm that I or my guests always seemed to run into with our faces.

While pricier, they are a much nicer product too. sounds like Nick can help you out, and is likely to be the low cost provider especially when you figure in his experience.

I have not been impressed with camping world when it came to my bus conversion.  They want to sell lots of product and fast, didn't seem to be able to accommodate thoughtful questions.