Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: grantgoold on June 24, 2007, 07:09:40 AM

Title: koni shocks?
Post by: grantgoold on June 24, 2007, 07:09:40 AM
Anybody using Koni adjustable shocks on their MCI 9s? If so, what has been your experience? Are the shocks all the same (front,tag,drive)?

Thanks

Grant
Title: Re: koni shocks?
Post by: WEC4104 on June 24, 2007, 07:40:49 AM
Grant:

Not an MCI-9, but I installed Koni adjustables on the front of my 4104.  I am very pleased with the ride improvement.  I initally set them at the middle of the ride firmness scale.  After a test ride or two, I increased it to one step below the firmest ride (perfect).   It made a big enough difference that the replacement of my rear shocks as dropped down considerably on my list of priorities.
Title: Re: koni shocks?
Post by: Eagle on June 24, 2007, 07:54:45 AM
Grant

Go to:  WWW.Koni-NA.com/Heavyduty  (http://www.koni-na.com/Heavyduty)

You will be able to find out about the shocks.


JCB
Title: Re: koni shocks?
Post by: H3Jim on June 24, 2007, 09:53:20 AM
I have them on my fronts and tags, made a big differnence.
Title: Re: koni shocks?
Post by: grantgoold on June 24, 2007, 02:28:49 PM
Thanks to everyone for their insight. I will consider some for the front to check them out!

Grant
Text only | Text with Images