I have the Freedom Combi 458 and am looking for the battery temperature control sensor. Anybody have one laying around?
Grant
Sacramento
Sorry Grant,
Not I...
Good Luck
Nick-
This might be my first stumper :D
Grant
Grant,
I do have a spare one, but only because I did not install it with the new inverter last year. It is on the roundtoit list. Thanks for reminding me of this.
However, I must ask the crew, if I have sealed AGM batts (4) 8D's do I need the thermal sensor ? I guess I have procrastinated in asking this question as well.
Gary P.
Gary, now that hurts :)
I will watch the replies to see if your unit is truly an extra.
Grant
Quote from: Gary '79 5-C on June 24, 2007, 06:21:20 PM
Grant,
I do have a spare one, but only because I did not install it with the new inverter last year. It is on the roundtoit list. Thanks for reminding me of this.
However, I must ask the crew, if I have sealed AGM batts (4) 8D's do I need the thermal sensor ? I guess I have procrastinated in asking this question as well.
Gary P.
Hi Gary,
Even AGM's will heat up like LA batt's. The sensor is needed to tell the charger when to stop bulk charging and switch to float.
It's a way to keep batt's from gassing.
The sensor should be mounted at the furthest battery.
Nick-
Nick, you are not helping!!! ;D ;D ;D