Howdy from North of the Border (NOB),
Driving my 4104 last week, noticed a pronounced vibration while pulling a big hill in 2nd gear between 1800-2000 RPM, speed around 20 MPH.
Config is 6N71, 4 speed Spicer manual. I didn't notice any vibration on the flats in any gear at 2Grand.
Anything to be concerned about?
Thanks in advance.
Aron.
Vibrations are never good and generally get worse. I am not familiar with the 4104 drivetrain but if it u-joints I would have them checked.
Because it seems you notice it going up hills only, check anything related to engine mounting, as suggested u joints and such. When you put a load on something, if there is a weak point it will be more pronounced. I am also not familiar with your coach, just thoughts that came to mind as I read your post.
HIH,
Happy Trails,
Paul
Dreamscape