BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: rv_safetyman on June 17, 2007, 11:46:27 AM

Title: Eagle Wheel Alignment?
Post by: rv_safetyman on June 17, 2007, 11:46:27 AM
I have been getting some uneven wear on the front tires and thought I should check the alignment. A quick check of the toe-in shows over 1/2 inch.  I suspect that is more than spec.

Question is, what is the wheel alignment spec. for a 1985 Eagle 10?  I have both the printed and CD versions of the repair manual, and alignment is not covered. >:( ??? 

Anyone know where I could go to get the specifications?

Jim

Title: Re: Eagle Wheel Alignment?
Post by: Connel on June 17, 2007, 02:47:27 PM
Jim,

According to the Maintenance Manual for my 05 the Toe-In should be 0-1/8 on Bias Ply Tires and Zero Toe-In on Radial Tires.  Your 10 should be the same.

Need to call you sometime - I no longer have need of my AutoShift transmission and related parts.

Connel

Title: Re: Eagle Wheel Alignment?
Post by: sivrtnge2 on June 17, 2007, 03:41:44 PM
Hey Connel,
I am lookingfor an autoshift tranny!!!
--
BILL
Title: Re: Eagle Wheel Alignment?
Post by: sivrtnge2 on June 17, 2007, 03:43:05 PM
Sorry RV ...not trying to jack your thread...or take your parts!!
--
BILL
Title: Re: Eagle Wheel Alignment?
Post by: rv_safetyman on June 18, 2007, 06:58:01 AM
Thanks Connel.  That is the  value I would have guessed from some other reading and past experience.  However, you never know what an OEM might spec to address some issue.

Drop me a line off-line and tell me what direction are you going with the transmission.

Bill, no problem.  I have one that works fine and don't want another.  I think Connel might want to know what the market is for the unit.

Jim

Title: Re: Eagle Wheel Alignment?
Post by: Connel on June 18, 2007, 08:44:47 PM
Bill,

Check your e-mail.

Connel