Print Page - ADJUSTING RPM's

Title: ADJUSTING RPM's
Post by: Eagle on June 16, 2007, 01:45:21 PM

I have fixed the air leak on my DD6V92TA and the RPM's are at 2100 which they should be but I would like to raise the RPM's to about 2300. There are 3 washers about 1/16 of an inch thick and about 5 that are real thin. I need an educated guess as to how many of the washers I would need to remove to get it close to 2300 RPM's.

Thanks

Title: Re: ADJUSTING RPM's
Post by: superpickle on June 16, 2007, 03:12:53 PM

Trial and Error !
Take ONE fat one out and check the Tach !!
Take n Check... Take n Check... Take n Check... Take n Check... Take n Check... Listen for Big Boom... ;D

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Eagle on June 16, 2007, 01:45:21 PM