Gentlemen,
I'm removing the coach air unit.... So far I have removed all parts in the front compartment. These parts are free for the asking, you pay shipping.
Bill
Currently in Phoenix, Az
Bill, Did you get your new couch and other parts in? I will be in the area at the end of May if you need a hand and I get break free from family. Tom Y
Bill: You might phone this fellow who posted a couple of days ago He is a newby so may not be reading every day.
Topic: MCI5A Stock A/C Evap Blower Assembly needed (Read 70 times)
boise belle
Newbie
Posts: 3
MCI5A Stock A/C Evap Blower Assembly needed
« on: April 23, 2007, 07:16:27 PM »
Reply with quoteQuote
Folks, does anyone have an extra blower assembly laying around?? This is the one from inside the front luggage bay. It consists of a 1hp motor with a blower wheel on both sides. Please call or email me. Dale 208-288-4441 or johansen231@msn.com Thanks
Tom,
I cut the love seat out, yep, took a saw saw to it. For the time being, I'm going to keep the couch.
Thanks for the offer.
Stan,
The motor and blowers in the middle of the bus,,,,,,that he spoke of, isn't that heating? ??? Talking to him now...
Bill
I need the condensor fan assembly,do you still have it,and was it in working order?
Bill
I'd like to have the condensor and compressor, but I just can't justify paying shipping to MN. Any chance you're coming this way, or possibly through southern WY or along I-25 through CO (Pueblo, Denver, etc)?
I'd like to have the A/C relay in the A/C junction box if you're parting with that. That one I could afford to pay shipping on.
Are you removing the coach heat, also? I'd like to have the water control valve, tunnel sensor, and control relay in the front junction box if you are.
craig
Trailblazer2,
You speaking of the motor and fan located front compartment, under the driver? Yes, it is out, was working last time I turned it on. Do you want the mounting bracket also?
Will ship it UPS, if you like?
Let me know.....
Craig, where is that relay located?
Bill
Grumpy,
Have not a clue when I will be leaving Phoenix. When Raytheon moves me, not a clue, where they will send me. My best guess, is I will move around 1 June, but where to, is anyones guess. I can hold onto the compressor for awhile.
Unless, someone comes and get it before then..
Bill
Bill,
Thanks for the pictures. I'll be e-mailing you later today.
I like the color you are painting your bus. It's looking real sweet!
How many coats are you going to put on?
Are you going to do a clear coat while everything is set-up?
Later
Skip
Bill;
Yes;the motor assembly under the driver is what I need. I need the brackets as well. I live in Siler City,N.C. 27344. I can send you the amount needed to ship through Paypal,or however you desire.
Thanks!
Bill
Bill,
I will ship via, UPS, then let you know that it cost. You can then send me a check.
Please provide shipping address. Will get it out Monday or Tuesday.
Bill
Quote from: Kwajdiver on April 26, 2007, 06:31:31 AM
Craig, where is that relay located?
It's in the A/C junction box, which is hanging from the ceiling (bottom of the floor) on the driver's side of the first bay. It's a large relay. Should say 200 amp.
Bill,
Do you also want the floor pan, that it was all mounted on..? It has a opening for the fan.
Bill
Bill;
Yea; go ahead and send that cover with the fan assy,and I will pay the cost. I have e-mailed the address to you. Thanks again!
Bill
Bill,
It is on the way, three boxes. The motor weight in at 68 pounds.
Bill