BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: 64MCI on July 13, 2026, 05:24:43 PM
Hello,
In my attempt to diagnose if my relay valve is bad or if it's a dd3 diaphragm (https://busconversionmagazine.com/forum/index.php?msg=432719), I've broken an air line fitting. Anybody have ideas on how to remove the threaded end before I break something worse?
20260713_172441.jpg
Thanks,
Jed
Find a star drive with a socket adapter that does not quite fit and a small impact gun. Drive the star bit in tight. Remove with impact.