BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: 64MCI on June 29, 2026, 05:59:15 AM
Hello again!
I got home from a trip yesterday and before moving my bus to it's normal parking spot, I got an air leak that won't allow the bus to build air pressure.
This is the view in front of the rear axle on my MC5. First question, is the blue assembly/part the inversion valve?
20260628_164318 - Copy.jpg
Here is the spot that is leaking all my air.
20260628_164401 - Copy.jpg
Assuming it is the inversion valve, I've read some folks rebuild them and some replace the whole thing. What say you?
Thanks!