Print Page - MCI-9 A/C Unit Removal

Title: MCI-9 A/C Unit Removal
Post by: Kwajdiver on March 24, 2007, 03:21:34 PM

Since I do not plan to repair or ever use the bus a/c system, I would like to remove it.
Anything I should know before removing the condensor and receiver tank. I know there is pressure on it.

Thanks for the input,

Bill
Still in Little Rock

Title: Re: MCI-9 A/C Unit Removal
Post by: JackConrad on March 24, 2007, 04:12:09 PM

If the AC system is charged, you might want to check with local automotive AC shops, They might pay you for the Freon or at least remove it for you. Jack

Title: Re: MCI-9 A/C Unit Removal
Post by: Nick Badame Refrig/ACC on March 24, 2007, 07:19:25 PM

Hi Bill,

After you remove thr freon, seal each componet with tape so air and moisture are kept out. [condencer, tx valve, compressoe, ect.]

This way you can offer the componets to other busnuts. We are always looking for spares...

Good Luck
Nick-

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Kwajdiver on March 24, 2007, 03:21:34 PM