I have seen these guys at car lots their work seems to be good,my ? has anyone here ever used a mobile paint and body person. I have a hicky on 1 bay door,the shop I use sometimes wants $1400.00 and me bring it in for 2 weeks his last 2 weeks turned into 5 weeks.The mobile guys uses the same material bought from the same place and he wants $750.00 and 2 or 3 days done at my place,what say the wise ones :^
2 to 3 days for a "hickey"? What are they going to do that takes so long?
wait for paint to dry and retape for the next coat..>>>Dan
Quote from: chessie4905 on February 19, 2023, 08:12:26 AM
2 to 3 days for a "hickey"? What are they going to do that takes so long?
You can feel it in the door and the whole door has to painted and with the fading and blending of the different colors it's not something I would attempt lol a solid color is not near as bad as trying to blend colors ,the door has 4 different colors of gray ,I doubt he can do it 3 days with the base coat clear coat.
We had our bus painted by a mobile painter that did it in our bus barn. Only way to go! :^
2 to 3 days, not 16 to 24 hours. Maybe 6 hours total.
Quote from: chessie4905 on February 19, 2023, 03:43:34 PM
2 to 3 days, not 16 to 24 hours. Maybe 6 hours total.
All I know John is the shop quoted me 11 hours labor @ $95.00 and $392.00 taxes, parts and supplies, for a total of $1,437.00.I have $1000.00 deductible. It pisses me off knowing that State Farm is only going to pay him $65.00 a hour if I file a insurance claim.So I am looking for another option
Don't get upset at just State Farm, all insurance companies do it, car manufacturers do it. Someone on FB showed Toyota allowed 2.5 hours to replace evaporator. If true, impossible to do. Dash and steering column need removed, case split, etc.
Back when Olds diesels came out, GM only allowed 8 or 10 or less hours to do head gaskets. All were warranty jobs for first 3 or so years. Lot of clean up time involved to do it right to avoid repeat failures. Had to run a tap in all bolt holes and clean. Carefully completely clean gasket surfaces. Those gaskets seemed to bond to surface. Mainly used razor blade scraper. Wire wheel on intake sides and valve cover gasket surfaces. Starting in 80, GM installed EGR on them, so the carbon soot-oil coating needed to be all removed from interior of intake and ports on head. Parts mgr. was always grumbling about how much they lost in reimbursement. Fortunately I was paid by the hour. Only had one gske comeback in a few months. Compression ring on gasket wore a groove into head surface. Ended up replacing heads to fix. Heads weren't to be resurfaced.
couple pics?Hard to translate to car dent. lolDepending on specifics maybe even those dent removal service can do the job.
Quote from: windtrader on February 20, 2023, 05:43:43 PM
couple pics?Hard to translate to car dent. lolDepending on specifics maybe even those dent removal service can do the job.
Don it is a fiberglass baggage door on my Country Coach it is more that dent the rock left a mark in the fiberglass.Van said he can repair it