BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Jsrcaptain on June 04, 2021, 01:41:02 PM
I can't find the location of the fuel pressure switch. It opens the starter circuit at 8-10 psi.
'72 MCI MC5B with 8V71
Thanks
If I remember correctly, which I might not, it screws into the secondary fuel filter housing.
That makes sense. I'll look closer. It may have been removed.
Thanks
Quote from: thomasinnv on June 05, 2021, 12:46:55 PM
If I remember correctly, which I might not, it screws into the secondary fuel filter housing.
Correct - - - Mine is located on the secondary fuel filter. One wire in and one wire out for a ground.
My ground is a clamp on the slobber tube near the starter.
Good luck. Merle. ;)
Photo