Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Jsrcaptain on May 02, 2021, 05:09:34 AM

Title: MCI window screens
Post by: Jsrcaptain on May 02, 2021, 05:09:34 AM
I'm looking for ideas for screens on the stock side windows. I'd like to keep the original windows. Maybe a sliding inside screen??

Thanks
Title: Re: MCI window screens
Post by: Utahclaimjumper on May 02, 2021, 06:34:09 AM
  I'm not familiar with the MCI window trim,, but in the olden days, we would take the outside window trimmers off a GMC and attach the screen to the inner side.. Then reinstall the trimmer for a nice looking screen system..>>>Dan
Title: Re: MCI window screens
Post by: chessie4905 on May 02, 2021, 09:30:19 AM
We did that on our former 4104 also.
Title: Re: MCI window screens
Post by: Utahclaimjumper on May 02, 2021, 04:58:15 PM

Using black screen it would give you a clean "limo" look..>>>Dan
Title: Re: MCI window screens
Post by: Jsrcaptain on May 02, 2021, 05:56:35 PM
Great idea! Thanks
Title: Re: MCI window screens
Post by: dtcerrato on May 02, 2021, 07:57:17 PM
Here's a photo of screens we made for our 4104.
Screen is on a stretch frame then sandwiched & glued between two 1/8" tempered hardboard frames contoured to fit front & back large slider windows. Unit sits in same track as slider then closes tight to it.
Works great. Three motorized 14x14 roof vent fans make the screens flow.
Text only | Text with Images