Print Page - Governor wedge tool.

Title: Governor wedge tool.
Post by: biff on March 05, 2021, 11:58:32 AM

Hi all.I need the dimesions of tool j35516 so i can make one.could someone post it hear. Thanks. :-\

Title: Re: Governor wedge tool.
Post by: lostagain on March 05, 2021, 12:27:22 PM

You can just use a screwdriver to push and hold the weights open.

Title: Re: Governor wedge tool.
Post by: luvrbus on March 05, 2021, 04:55:05 PM

If you are not doing a bench setting and if the engine is running you set the air gap with it running make a mess but simple to do.with 3 different angles on the wedge it would be hard for me to measure mine

Title: Re: Governor wedge tool.
Post by: biff on March 06, 2021, 07:06:17 PM

THANKS for the reply. :)

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: biff on March 05, 2021, 11:58:32 AM