Good day, i am looking for windows for my 102dl3 1999 that slide open but would be installed in the original way of the existing windows. Is there a company that makes these. Prefer canadian company just because of the dollar diference but not picky.
Thanks
https://www.motionwindows.com/bus-windows/ this is pretty much it.
in 2005 I used there windows to the size I asked for in the M C I and they were very good . the featherlite I have now has there windows as well . but I am not sure if they still do windows now . I would give them a call and see if they will still do them or if they know someone that does .
dave
https://www.ctidirectory.com/search/company.cfm?company=13044
Hi All, I ordered from Pinninsula/Motion Windows in early Feb for my front driver's side window, asked for it to come around now. IT has a 2'X1' screened slider. They also have correct fit opening, slide windows with screens for emergency windows for MCI. Will show pictures when I receive it, lvmci...
Thanks all, i will give these suggestions a call
On our 96A3 we used Motion Windows to replace the two front windows, one on each side.
We are very happy with them.
They fit into the original window openings perfectly no adjustments at all, just put the gasket around the window, insert in the opening and put the inside ring in place, then put in all the screws that sandwich the windows onto the bus wall between the window and inside ring, there are 29 screws on each window.
Has almost the same tint as the original windows.
(https://busconversionmagazine.com/forum/proxy.php?request=http%3A%2F%2Fwww.peterbylt.com%2Fmci96a3%2Fwindow6.jpg&hash=0ecda50f068be71a93663f27915769b346bd4722)
Peter
Good day. Got hold of motion windows and they gave me a great quote on the 6 windows i want for my 99 mci. I will have to wait now till the canadian dollar goes up a bit. But also decided to go for the windows and maxx air vents rather than buying 3 air conditioners.
Thanks again for the tip
You still may want an AC or two.