lvmci or luvrbus
Do either one of you know of a V730 spacer ring? You guys are really into DD's so I thought I would ask you directly.
Bill, when I sold our 4107, I included all the parts to install a 730 (except the 730). I know there was a spacer ring, dogbone, maybe some other stuff. The purchaser was in Colorado, already had a 4107 and bought ours to have a ready collection of spare parts. I haven't seen him post on either board in a very long time, so don't know the status of him or the coaches.
If you don't find what you're looking for, please let me know and I'll try to find his contact information.
Arthur
I don't have the the ring Bill,we had one but like you Mac tried to install a RTs engine and 730 in his 4106 and the angle was off and didn't clear the rear mount so it was used,do have a flywheel and the short shaft if you ever need it
Thanks for the replies Guys. I need the ring as i have the trans but no ring. Runcutter If you could find the guys info I would greatly appreciate it.
Bill, PM sent. Please let me know if you received it.
Arthur
Runcutter
I received your message. Thanks. The phone number is a good one. I left a message for him.
Bill,, Just got off the phone with a friend that has TWO of the spacer rings you need,, plus many other parts for a conversion,, short shaft, gaskets, etc, etc. Call Gary at 9282305035,, leave message..>>>Dan
I will call him tomorrow.
Quote from: Bill Gerrie on October 22, 2019, 09:09:26 PM
I will call him tomorrow.
Gary lives not far me I can go pick it up for you if he doesn't want to ship the parts
I will have to try Gary later. His mail box is full an will not accept new messages.
Quote from: Bill Gerrie on October 23, 2019, 09:24:01 AM
I will have to try Gary later. His mail box is full an will not accept new messages.
He is hard to reach sometimes lol like me
I got a hold of Gary. Great guy to talk to. He is looking for the rings.
You won't find a guy with more knowledge of V730 installations than Gary.. He did it as a business for many years.>>>Dan