Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Bill Gerrie on October 15, 2019, 06:58:35 PM

Title: V730 spacer ring
Post by: Bill Gerrie on October 15, 2019, 06:58:35 PM
Does anyone have a 3 1/2" spacer ring for a V730 transmission they would sell?
Title: Re: V730 spacer ring
Post by: chessie4905 on October 15, 2019, 07:08:04 PM
Do you actually need it. They were for the vs2's. My V730 doesn't  use one.
Title: Re: V730 spacer ring
Post by: Bill Gerrie on October 16, 2019, 07:02:51 AM
They were used on both VS2 and V730 to make the trans clear the rear motor mount. If the motor was to be moved slightly toward the trans you could probably get away without one.
Title: Re: V730 spacer ring
Post by: chessie4905 on October 16, 2019, 07:36:33 AM
Guy from Canada offered to trade one with me for the 1 to 1 steering gear set from 4905. Trouble was, nephew junked the steering column with the one gear attached. Oh well...
Title: Re: V730 spacer ring
Post by: Bill Gerrie on October 16, 2019, 07:59:49 AM
What a shame. Do you still have the ring?
Title: Re: V730 spacer ring
Post by: chessie4905 on October 16, 2019, 09:20:53 AM
HE had the ring.
Title: Re: V730 spacer ring
Post by: Bill Gerrie on October 16, 2019, 05:59:18 PM
Sorry. Misunderstood.
Title: Re: V730 spacer ring
Post by: olebusman on October 17, 2019, 09:25:13 AM
  chessie, are you making and ready to install that teal odrive
Title: Re: V730 spacer ring
Post by: Bill Gerrie on October 17, 2019, 12:23:43 PM
John
I don't think anyone else went through with the O/D unit.
Title: Re: V730 spacer ring
Post by: chessie4905 on October 17, 2019, 01:02:01 PM
Still need the vs2-6 parts before starting on it. So far, only stuff is in Ca. Long drive.
Title: Re: V730 spacer ring
Post by: Utahclaimjumper on October 17, 2019, 01:28:50 PM
 When Bill Teal quit the conversion business,, he sold me all the parts for VS2s he had,, two pallet loads for the cost of shipping..

I ,, in turn,, sold my 4106 ten years ago to to a Westen GM Coach member and all parts went with it...

That being said,,Phil Shiveley and I were talking about this a month ago,, he sold the 06 and would like to move this stash of parts to someone that needs them..>>>Dan  ( Many folks converted to Bill's system over the years and really liked the way it performed,,,but that was many years ago.>>>)
Title: Re: V730 spacer ring
Post by: chessie4905 on October 17, 2019, 03:33:46 PM
Well, Utah is a little closer...
Title: Re: V730 spacer ring
Post by: Bill Gerrie on October 17, 2019, 05:21:40 PM
Utahclaimjumper
Is there any way you could ask Phil if he has a spacer ring in the pile of stuff?
Title: Re: V730 spacer ring
Post by: Utahclaimjumper on October 17, 2019, 05:27:40 PM

I could do that but I don't know if he would know one if he saw it. ::) ;D >>>D
Title: Re: V730 spacer ring
Post by: Utahclaimjumper on October 17, 2019, 05:38:45 PM

I gave Phil a shout,, he will look thru the stack for the ring and get back to me..>>>Dan
Title: Re: V730 spacer ring
Post by: Bill Gerrie on October 18, 2019, 05:28:11 AM
Thanks Dan.
Title: Re: V730 spacer ring
Post by: chessie4905 on October 18, 2019, 06:28:19 AM
I'd be interested in the rest if there are vs2-6 od clutches, etc in the pile.
Text only | Text with Images