Print Page - GMC Bus Part needed

Title: GMC Bus Part needed
Post by: luvrbus on July 30, 2018, 09:37:34 AM

I need the spacer that goes on the bell housing used when converting a 4106 from a 4 speed to a V730 (8v71) anyone have one laying around, Luke sold his last one and doesn't have it.If you know of one please let me know thanks

Title: Re: GMC Bus Part needed
Post by: Scott Crosby on July 30, 2018, 10:03:33 AM

I have one but I?m on the road working for about 4 more weeks.

Title: Re: GMC Bus Part needed
Post by: chessie4905 on July 30, 2018, 10:06:14 AM

My 4905 has a V730 and does not use the spacer. Several years ago, I dismantled a Flxible city bus with 6V-71 and V730. It did not use a spacer either. The flywheel I have is 3 1/2 inches thick. The recess in the engine bell housing is 4 1/2 inches. Hope this helps.

Title: Re: GMC Bus Part needed
Post by: luvrbus on July 30, 2018, 10:38:41 AM

This one needs the spacer or the drive line pitch is way off ,Scott I am going to give the guy your number and he can deal with you direct

Title: Re: GMC Bus Part needed
Post by: Scott Crosby on July 30, 2018, 03:28:20 PM

I can probably have my kids ship it out

Title: Re: GMC Bus Part needed
Post by: luvrbus on July 30, 2018, 03:42:07 PM

Quote from: Scott Crosby on July 30, 2018, 03:28:20 PM
I can probably have my kids ship it out

Jere will be getting in touch with you,damn I lost your number pm me a contact so I can forward it

Title: Re: GMC Bus Part needed
Post by: Ed Hackenbruch on July 30, 2018, 07:35:16 PM

Drop your phone in the toilet again Clifford? ;D

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: luvrbus on July 30, 2018, 09:37:34 AM