Print Page - MCI 5B 1976 high beam floor switch

Title: MCI 5B 1976 high beam floor switch
Post by: richardkillmon on July 02, 2018, 04:26:37 PM

I have a 1976 MCI 5B challenger - Next to the driver on the floor are two high beam switches 12 inches apart.
From what I tried they both do the same thing, why?

Thanks for some of the answers and I should expand on what I did.
The switches are 12 aches apart front to back and I have clicked both switches and the only thing that happens on both switches is the high beam goes on and off. This is original from the factory.

Title: Re: MCI 5B 1976 high beam floor switch
Post by: buswarrior on July 02, 2018, 04:45:38 PM

Variously, you could have high beam, fog light, air horn/electric horn or a pair of transit style turn signals.

What some previous owner has done...? Only imagination is the limiter...

Happy coaching!
Buswarrior

Title: Re: MCI 5B 1976 high beam floor switch
Post by: richard5933 on July 02, 2018, 05:34:56 PM

Our 4106 had high beam on one and fog lights on the other. Not sure what the MCI had.

Title: Re: MCI 5B 1976 high beam floor switch
Post by: richardkillmon on July 02, 2018, 05:41:30 PM

thanks for the help

Title: Re: MCI 5B 1976 high beam floor switch
Post by: Lifes2short4nofun on July 02, 2018, 06:56:09 PM

On my 72' 5B the front one is for brights and the back one is the air horn.

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: richardkillmon on July 02, 2018, 04:26:37 PM