We read the book and it seems we have the ride height adjusted right underneath but it doesn't look like it when I look at the tire clearance for the front.
The back looks right I think.
Can any of you give advise?
Looks pretty decent to me. With the rubber skirt up front, it throws off the look compared to back. Mine looks the same and rides level.
Ride height should be level with the top of the bottom step in the doorway 14" above the ground.
At least that's what my 5C's books tell me, I'm guessing there's not a lot of difference between the B and C suspension settings.
FWIW & HTH. . .
;)
Looks like mine, even though a GMC.
If not somewhere close the U joints on the drive shaft will suffer.>>>Dan
As noted, you have different wheel well treatments, which screw up "the look"
If it measures correctly, job is done, what it looks like matters not...
Also as noted, proper measured ride height is important for u-joint driveshaft angles, and suspension/steering geometry.
happy coaching!
buswarrior