Moving along on a very simple MC9 conversion and have to deal with that terrible bathroom window. I am located in New England and a wrecking yard nearby has a few model D's but no 9's. They were not sure if the windows were the same, and neither am I. I am keeping all of the windows for now(to get it on the road ASAP) but would like toswap out a few with the Penninsula glass inserts. I am assuming because my bathroom window currently has a gasket that has been modified i will need a known good window with complete rubber seal. Or do they sell just the seals?
So if anyone could direct me to a potential east coast wrecking yard or help with advice, Also if anyone has a set of Pen windows they want to sell cheap ;D
Thanks
Dave
I've seen possibly MC-9's off Interstate 80 near Danville, PA. They are on right side off west bound lanes. Someone else on here may have better details. Also, Luke in NJ may be of help.
You need MC9/MC12 windows, "D" windows are different.
What seals do you mean? The entire window, frame and all, can be swapped out.
happy coaching!
buswarrior
You can check with http://rydemore.com/ (http://rydemore.com/) in Fitchburg, MA. They were parting out some MCI's a while ago and may have them. Contact Mark Bowers at MarkBowers@rydemore.com or call him at 978 342 1100 and tell him Gary Hatt from BCM sent you.
I may be parting out an MCI 9 soon, let me know if you can't find the parts you need.
Let me know if you part out an 9... We could use a boat ton of stuff :)
Thank you very much for some good leads, been offline awhile. Will check them all out.
I just assumed the Pen windows reused the rubber, looks like they just use the frame.
Thanks again
Dave