Clifford, I just want to confirm what you said about the ground wire (the one closest to the block) is connected to the negative (terminal on starter) cable. In fact it appears that wire is reversed with the other one. So the wire that comes from the relay(I presume) is closest to the block. I don't want to start willy nilly swapping wires and damage the starter. It is such a bi*ch to remove/replace.
Thanks
Freed.
The 2 small terminals below the cable connection the one to outside is for the starter relay or button the inside terminal is the ground that connects to large terminal on the back of the starter.LOL aren't those starters a real bitch to remove and replace