BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: aerialad on August 29, 2016, 07:33:27 PM

Title: mci 9 power steering fluid
Post by: aerialad on August 29, 2016, 07:33:27 PM
can I use motor oil as power steering fluid in 1983 mci 9
Title: Re: mci 9 power steering fluid
Post by: flynbanjo on August 29, 2016, 09:03:46 PM
I have an 81 mc9 and I had the same question.  I called MCI tech support and they recommend the same oil that you would put in the engine.  Straight 30 wt. 
Title: Re: mci 9 power steering fluid
Post by: ol713 on August 29, 2016, 09:25:50 PM

     I have an 8v-71 that uses straight 40 wt oil.  Have always used
     40 wt in the power steering also.
                                       Merle.
Title: Re: Re: mci 9 power steering fluid
Post by: thomasinnv on August 30, 2016, 06:28:32 AM
Quote from: flynbanjo on August 29, 2016, 09:03:46 PM
I have an 81 mc9 and I had the same question.  I called MCI tech support and they recommend the same oil that you would put in the engine.  Straight 30 wt. 
I think you mean 40wt?
Title: Re: mci 9 power steering fluid
Post by: Dave5Cs on August 30, 2016, 06:58:41 AM
Dextron ATF III because that is what was in it when I got it. Red in color. TRW- Ross
Dave
Title: Re: mci 9 power steering fluid
Post by: flynbanjo on August 30, 2016, 10:24:02 AM
What was I thinking?  You guys are right.  I meant 40wt.  That will teach me to think after midnight.
Title: Re: mci 9 power steering fluid
Post by: Scott & Heather on August 31, 2016, 07:36:31 PM
Think about this:

If the steering pump seal ever leaks (as it is on my coach) then the oil you have in your power steering system/reservoir will leak into the engine internally....which would you rather have? 40wt motor oil or transmission fluid leaking into your engine?


Sent from my iPhone using Tapatalk