Text only | Text with Images

BCM Community

Bus Discussion => Board Help => Topic started by: roadmangler on August 23, 2016, 05:25:23 PM

Title: 1988 MCI Bus Entrance Door
Post by: roadmangler on August 23, 2016, 05:25:23 PM
Hi Everybody
    I have a 1988 MCI bus conversion with a problem the switches for the entrance door do not work. I was on a website called FYI from MCI, it said to check fuse F15. Where would I find this fuse?
                                                      Thanks for your help
                                                                 MAX
Title: Re: 1988 MCI Bus Entrance Door
Post by: gumpy on August 26, 2016, 06:08:59 AM
Should be in the drivers side electrical panel, I would think. Check your manual.

What model is it?
Title: Re: 1988 MCI Bus Entrance Door
Post by: roadmangler on August 26, 2016, 06:28:37 AM
Good Morning Grumpy
      Its a 96 A3
Title: Re: 1988 MCI Bus Entrance Door
Post by: roadmangler on August 26, 2016, 06:31:36 AM
I mean Gumpy
Title: Re:
Post by: thomasinnv on August 26, 2016, 06:43:44 AM
Open the access door under the driver window. You might get lucky and find a decal on the inside of the door with the fuse location. Fyi the main disconnect has to be on for the door switch to have power.
Text only | Text with Images