Was trying to reply to Scott's post regarding his brake light issue. There's not reply button. Is it me, the thread, or the board?
Sometimes if you don't sign in it won't have a reply button?
I never sign out. And it shows it knows who I am.
Craig I locked the thread...
Sent from my iPhone using Tapatalk
Quote from: Scott Bennett on April 30, 2016, 06:07:07 PM
Craig I locked the thread...
Sent from my iPhone using Tapatalk
Oh. OK. I guess you got your question answered. Didn't see an answer on there, but ok.
Well at least it isn't because you had 200 ignores.
Haha. The answer is actually somewhat simple and I was slightly embarrassed. All this time I've been trying to chase down why I can't get my brake lights to work. I can't even get a signal. I spent $150 trying to deal with this and set up temporary brake lights using a micro switch and a whole lot of wire....only to realize on Thursday that the 102 happens to have a little 12 volt disconnect switch in the battery bay.....and previous owner redid everything in the tail light and brake light department on 12 VoLTs....turned the disconnect switch on and everything lit up. I took a nearby 2x4 and thwacked myself over the head good and hard for that one. 😳
Sent from my iPhone using Tapatalk
Yep. That'd do it. I never did find the 12v leak in my system, but installing that switch on the 12v side cured it.
Well glad you found it.
Thanks.
Sent from my iPhone using Tapatalk